Nas iscsi windows giá logo
Skip to main content This browser is no longer supported. Show Upgrade to Microsoft Edge to take advantage of the latest features, security updates, and technical support. iSCSI Target Ping Test (LOGO)
In this articleThis test verifies that iSCSI targets can send and receive ping requests. Because there is no standard mechanism for initiating the sending of ICMP echo messages on a target, manual interaction is required to complete the test. Test details
Additional documentationTests in this feature area might have additional documentation, including prerequisites, setup, and troubleshooting information, that can be found in the following topic(s):
Running the testBefore you run the test, complete the test setup as described in the test requirements: iSCSI Boot Component Testing Prerequisites. If this is the first time you are running an iSCSI HBA test, iSCSI Target test, or MPIO test over iSCSI bus type on the HLK client, or if there is no iscsihctconfig.ini under [HLK Path]\JobsWorkingDir\ on the HLK client, you will receive a dialog box to input iSCSI configuration information and/or HBA information. For more information about this dialog box, see "Running the test" in iSCSI HBA Boot Test (LOGO). TroubleshootingFor generic troubleshooting of HLK test failures, see Troubleshooting Windows HLK Test Failures. For troubleshooting information, see Troubleshooting Device.Storage Testing. In addition:
This test returns Pass or Fail. To review test details, review the test log from the Windows HLK Manager. More informationThis test operates in two phases:
To run this test:
Command syntax
Note For command-line help for this test binary, type /h. File list
Parameters
|