Sql lỗi msg 208 level 16 state 1 line 201 năm 2024

Error Severity Description 1 10 Version date of last upgrade: 10/11/90. 21 10 Warning: Fatal error %d occurred at %S_DATE. Note the error and time, and contact your system administrator. 53 10 An error has occurred while establishing a connection to the server. When connecting to SQL Server, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server ) (.Net SqlClient Data Provider). 101 15 Query not allowed in Waitfor. 102 15 Incorrect syntax near '%.*ls'. 103 15 The %S_MSG that starts with '%.*ls' is too long. Maximum length is %d. 104 15 ORDER BY items must appear in the select list if the statement contains a UNION operator. 105 15 Unclosed quotation mark before the character string '%.*ls'. 106 16 Too many table names in the query. The maximum allowable is %d. 107 15 The column prefix '%.*ls' does not match with a table name or alias name used in the query. 108 15 The ORDER BY position number is out of range of the number of items in the select list. 109 15 There are more columns in the INSERT statement than values specified in the VALUES clause. The number of values in the VALUES clause must match the number of columns specified in the INSERT statement. 110 15 There are fewer columns in the INSERT statement than values specified in the VALUES clause. The number of values in the VALUES clause must match the number of columns specified in the INSERT statement. 111 15 'CREATE FUNCTION' must be the first statement in a query batch. 112 15 Variables are not allowed in the %ls statement. 113 15 Missing end comment mark '*/'. 114 15 Browse mode is invalid for a statement that assigns values to a variable. 115 15 The FOR UPDATE clause is invalid for statements containing set operators. 116 15 Only one expression can be specified in the select list when the subquery is not introduced with EXISTS. 117 15 The object name "Object Name" contains more than the maximum number of prefixes. The maximum is 2. 118 15 Only members of the sysadmin role can specify the %ls option for the %ls statement. 119 15 Must pass parameter number %d and subsequent parameters as '@name = value'. After the form '@name = value' has been used, all subsequent parameters must be passed in the form '@name = value'. 120 15 The select list for the INSERT statement contains fewer items than the insert list. The number of SELECT values must match the number of INSERT columns. 121 15 The select list for the INSERT statement contains more items than the insert list. The number of SELECT values must match the number of INSERT columns. 122 15 The %ls option is allowed only with %ls syntax. 123 15 Batch/procedure exceeds maximum length of %d characters. 124 15 CREATE PROCEDURE contains no statements. 125 15 Case expressions may only be nested to level %d. 126 15 Invalid pseudocolumn "%.*ls". 127 15 A TOP N value may not be negative. 128 15 The name '' is not permitted in this context. Only constants, expressions, or variables allowed here. Column names are not permitted. 129 15 Fillfactor %d is not a valid percentage; fillfactor must be between 1 and 100. 130 16 Cannot perform an aggregate function on an expression containing an aggregate or a subquery. 131 15

The size () given to the type 'varchar / char / nvarchar / nchar / binary / varbinary' exceeds the maximum allowed for any data type (8000).

The size () given to the column '' exceeds the maximum allowed for any data type (8000).

132 15 The label '%.*ls' has already been declared. Label names must be unique within a query batch or stored procedure. 133 15 A GOTO statement references the label '' but the label has not been declared. 134 15 The variable name '%.*ls' has already been declared. Variable names must be unique within a query batch or stored procedure. 135 15 Cannot use a BREAK statement outside the scope of a WHILE statement. 136 15 Cannot use a CONTINUE statement outside the scope of a WHILE statement. 137 15 Must declare the scalar variable ''. 138 15 Correlation clause in a subquery not permitted. 139 15 Cannot assign a default value to a local variable. 140 15 Can only use IF UPDATE within a CREATE TRIGGER statement. 141 15 A SELECT statement that assigns a value to a variable must not be combined with data-retrieval operations. 142 15 Incorrect syntax for definition of the '%ls' constraint. 143 15 A COMPUTE BY item was not found in the order by list. All expressions in the compute by list must also be present in the order by list. 144 15 Cannot use an aggregate or a subquery in an expression used for the group by list of a GROUP BY clause. 145 15 ORDER BY items must appear in the select list if SELECT DISTINCT is specified. 146 15 Could not allocate ancillary table for a subquery. Maximum number of tables in a query (%d) exceeded. 147 15 An aggregate may not appear in the WHERE clause unless it is in a subquery contained in a HAVING clause or a select list, and the column being aggregated is an outer reference. 148 15 Incorrect time syntax in time string '' used with WAITFOR. 149 15 Time value '%.*ls' used with WAITFOR is not a valid value. Check date/time syntax. 150 15 Both terms of an outer join must contain columns. 151 15 '%.*ls' is an invalid money value. 152 15 The same large data placement option "%.*ls" has been specified twice. 153 15 Invalid usage of the option %.*ls in the %ls statement. 154 15 a COMPUTE clause is not allowed in a SELECT INTO statement. 155 15 '' is not a recognized DATEADD option. 156 15 Incorrect syntax near the keyword '%.*ls'. 157 15 An aggregate may not appear in the set list of an UPDATE statement. 158 15 An aggregate may not appear in the OUTPUT clause. 159 15 SQL Server 2005, SQL Server 2008 - Must specify the table name and index name for the DROP INDEX statement. SQL Server 2000 - For DROP INDEX, you must give both the table and the index name, in the form tablename.indexname. 160 15 Rule does not contain a variable. 161 15 Rule contains more than one variable. 162 15 Invalid expression in the TOP clause. 163 15 The compute by list does not match the order by list. 164 15 Each GROUP BY expression must contain at least one column that is not an outer reference. GROUP BY expressions must refer to column names that appear in the select list. 165 16 Privilege %ls may not be granted or revoked. 166 15 'CREATE VIEW' does not allow specifying the database name as a prefix to the object name. 167 16 Cannot create a trigger on a temporary object. 168 15 The %S_MSG '%.*ls' is out of the range of computer representation (%d bytes). 169 15 A column has been specified more than once in the order by list. Columns in the order by list must be unique. 170 15 Line %d: Incorrect syntax near '%.*ls'. 171 15 Cannot use SELECT INTO in browse mode. 172 15 Cannot use HOLDLOCK in browse mode. 173 15 The definition for column must include a data type. 174 15 The dateadd function requires 3 arguments. 175 15 An aggregate may not appear in a computed column expression or check constraint. 176 15 The FOR BROWSE clause is no longer supported in views. Set the database compatibility level to 80 or lower for this statement to be allowed. 177 15 The IDENTITY function can only be used when the SELECT statement has an INTO clause. 178 15 A RETURN statement with a return value cannot be used in this context. 179 15 Cannot use the OUTPUT option when passing a constant to a stored procedure. 180 15 There are too many parameters in this %ls statement. The maximum number is %d. 181 15 SQL Server 2008 - Cannot use the OUTPUT option in a DECLARE, CREATE AGGREGATE or CREATE FUNCTION statement. SQL Server 2005 - Cannot use the OUTPUT option in a DECLARE or CREATE FUNCTION statement. SQL Server 2000 - Cannot use the OUTPUT option in a DECLARE statement. 182 15 Table and column names must be supplied for the READTEXT or WRITETEXT utility. 183 15 The scale () for column '' must be within the range 0 to . 184 15 DEFAULT cannot be specified more than once for filegroups of the same content type. 185 15 Data stream is invalid for WRITETEXT statement in bulk form. 186 15 Data stream missing from WRITETEXT statement. 187 16 The valid range for MAX_QUEUE_READERS is 0 to 32767. 188 15 Cannot specify a log device in a CREATE DATABASE statement without also specifying at least one non-log device. 189 15 The %ls function requires %d to %d arguments. 190 15 An invalid date or time was specified in the statement. 191 15 Some part of your SQL statement is nested too deeply. Rewrite the query or break it up into smaller queries. 192 16 The scale must be less than or equal to the precision. 193 15 The object or column name starting with '%.*ls' is too long. The maximum length is %d characters. 194 15 A SELECT INTO statement cannot contain a SELECT statement that assigns values to a variable. 195 15 'Function Name' is not a recognized function name. 196 15 SELECT INTO must be the first query in an SQL statement containing a UNION, INTERSECT or EXCEPT operator. 197 15 EXECUTE cannot be used as a source when inserting into a table variable. 198 15 Browse mode is invalid for statements containing a UNION operator. 199 15 An INSERT statement cannot contain a SELECT statement that assigns values to a variable. 201 16 Procedure '' expects parameter '', which was not supplied. 202 16 Invalid type '%s' for WAITFOR. Supported data types are CHAR/VARCHAR, NCHAR/NVARCHAR, and DATETIME. WAITFOR DELAY supports the INT and SMALLINT data types. 203 16 The name '%.*ls' is not a valid identifier. 204 20 Normalization error in node %ls. 205 16 All queries in an SQL statement containing a UNION operator must have an equal number of expressions in their target lists. 206 16 Operand type clash: %ls is incompatible with %ls 207 16 Invalid column name '%.*ls'. 208 16 Invalid object name '%.*ls'. 209 16 Ambiguous column name '%.*ls'. 210 16 Syntax error converting datetime from binary/varbinary string. 211 12 SyntaxPossible schema corruption. Run DBCC CHECKCATALOG. 212 16 Expression result length exceeds the maximum. %d max, %d found. 213 16 Insert Error: Column name or number of supplied values does not match table definition. 214 16 Procedure expects parameter '%ls' of type '%ls'. 215 16 Parameters supplied for object '%.*ls' which is not a function. If the parameters are intended as a table hint, a WITH keyword is required. 216 16 Parameters were not supplied for the function '%.*ls'. 217 16 Maximum stored procedure, function, trigger, or view nesting level exceeded (limit %d). 218 16 Could not find the type '%.*ls'. Either it does not exist or you do not have the necessary permission. 219 16 The type '%.*ls' already exists, or you do not have permission to create it. 220 16 Arithmetic overflow error for data type %ls, value = %ld. 221 10 FIPS Warning: Implicit conversion from %ls to %ls. 222 16 The base type "%.*ls" is not a valid base type for the alias data type. 223 11 Object ID %ld specified as a default for table ID %ld, column ID %d is missing or not of type default. 224 11 Object ID %ld specified as a rule for table ID %ld, column ID %d is missing or not of type default. 225 16 The parameters supplied for the %ls "%.*ls" are not valid. 226 16 %ls statement not allowed within multi-statement transaction. 227 15 %.*ls is not a valid function, property, or field. 228 15 Method '%.*ls' of type '%.*ls' in assembly '%.*ls' does not return any value. 229 14 %ls permission denied on object '%.*ls', database '%.*ls', owner '%.*ls'. 230 14 %ls permission denied on column '%.*ls' of object '%.*ls', database '%.*ls', owner '%.*ls'. 231 11 No such default. ID = %ld, database ID = %d. 232 16 Arithmetic overflow error for type %ls, value = %f. 233 16 The column '%.*ls' in table '%.*ls' cannot be null. 234 16 There is insufficient result space to convert a money value to varchar / nvarchar / char / nchar. 235 16 Cannot convert a char value to money. The char value has incorrect syntax. 236 16 The conversion from char data type to money resulted in a money overflow error. 237 16 There is insufficient result space to convert a money value to int / smallint / tinyint. 238 16 There is insufficient result space to convert the %ls value (= %d) to the money data type. 239 16 Duplicate common table expression name '%.*ls' was specified. 240 16 Types don't match between the anchor and the recursive part in column "" of recursive query "". 241 16 Syntax error converting datetime from character string. 242 16 The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value. 243 16 Type is not a defined system type. 244 16 The conversion of the %ls value '%.*ls' overflowed an %hs column. Use a larger integer column. 245 16 Syntax error converting the varchar value to a column of data type int. 246 16 No anchor member was specified for recursive query "%.*ls". 247 16 An anchor member was found in the recursive part of recursive query "%.*ls". 248 16 The conversion of the %ls value '%.*ls' overflowed an int column. Maximum integer value exceeded. 249 16 The type "%ls" is not comparable. It cannot be used in the %ls clause.

Error Severity Description 251 16 Could not allocate ancillary table for query optimization. Maximum number of tables in a query (%d) exceeded. 252 16 Recursive common table expression '' does not contain a top-level UNION ALL operator. 253 16 Recursive member of a common table expression '' has multiple recursive references. 254 16 Prefixed columns are not allowed in the column list of a PIVOT operator. 255 16 Pseudocolumns are not allowed in the column list of a PIVOT operator. 256 16 The data type int is invalid for the substring function. Allowed types are: char/varchar, nchar/nvarchar, and binary/varbinary. 257 16 Implicit conversion from data type %ls to %ls is not allowed. Use the CONVERT function to run this query. 258 16 Cannot call methods on %ls. 259 16 Ad hoc updates to system catalogs are not enabled. The system administrator must reconfigure SQL Server to allow this. 260 16 Disallowed implicit conversion from data type %ls to data type %ls, table '%.*ls', column '%.*ls'. Use the CONVERT function to run this query. 261 16 '%.*ls' is not a recognized function. 262 16 %ls permission denied in database '%.*ls'. 263 16 Must specify table to select from. 264 16 Column name '%.*ls' appears more than once in the result column list. 265 16 The column name "%.*ls" specified in the %ls operator conflicts with the existing column name in the %ls argument. 266 16 Transaction count after EXECUTE indicates that a COMMIT or ROLLBACK TRANSACTION statement is missing. Previous count = %ld, current count = %ld. 267 16 Object '%.*ls' cannot be found. 268 16 Cannot run SELECT INTO in this database. The database owner must run sp_dboption to enable this option. 270 16 Object '%.*ls' cannot be modified. 271 16 SQL Server 2005, SQL Server 2008, SQL Server 2012 - The column '' cannot be modified because it is either a computed column or is the result of a UNION operator. SQL Server 2000 - Column '' cannot be modified because it is a computed column. 272 16 Cannot update a timestamp column. 273 16 Cannot insert a non-null value into a timestamp column. Use INSERT with a column list or with a default of NULL for the timestamp column. 275 16 Prefixes are not allowed in value or pivot columns of an UNPIVOT operator. 276 16 Pseudocolumns are not allowed as value or pivot columns of an UNPIVOT operator. 277 16 The column "%.*ls" is specified multiple times in the column list of the UNPIVOT operator. 278 16 The text, ntext, and image data types cannot be used in a GROUP BY clause. 279 16 The text, ntext, and image data types are invalid in this subquery or aggregate expression. 280 16 Only text, ntext, and image columns are valid with the TEXTPTR function. 281 16