- Catalog
- Gear Finder
- Zap Adhesives
- Gifts
- Support
- Events
- FAQs
Catalogs
- Monthly Specials
- Air Systems Components
- Air Couplers
- Air Cylinders
- Air Kits
- Air Tanks
- Air Valves
- Accessories
- Retracts
- By Manufacturer
- By Aircraft Weight
- Less Than 2lbs
- 2 - 5lbs
- Mechanical
- Pneumatic
- 5 - 10lbs
- 600 Series
- Pneumatic
- Mechanical
- Electric
- 615 Rotating
- Pneumatic
- Electric
- 600 Series
- 6 - 12lbs
- 510 Series
- Electric
- Mains
- Nose
- Tri-Gear Sets
- Electric Conversion Kits
- SpringDown
- Mains
- Nose
- Tri-Gear Sets
- Electric
- 590 Series PRS
- Mains
- Mechanical
- Pneumatic
- Electric
- Nose
- Mechanical
- Pneumatic
- Electric
- Pneumatic Conversion Kits
- Electric Conversion Kits
- Mains
- OEM Retract Sets
- Electric
- Mechanical
- Pneumatic
- 510 Series
- 8 - 18lbs
- 530 Series
[Reverse & Low Profile]
- Mains
- Electric
- Pneumatic
- Nose
- Electric
- Pneumatic
- Mains
- 550 Series
- Mains
- Electric
- Electric Conversion Kits
- Pneumatic
- Nose
- Electric
- Electric Conversion Kits
- Pneumatic
- Mains
- 560 Series
- Nose
- Electric
- Electric Conversion Kits
- Pneumatic
- Nose
- 815 Series Rotating
- Electric
- Pneumatic
- OEM Retract Sets
- Pneumatic
- 530 Series
[Reverse & Low Profile]
- 12 -
24lbs
- 620 Series
- Pneumatic
- Electric
- Electric Conversion Kits
- 630 Series
- Mains
- Pneumatic
- Electric
- Electric Conversion Kits
- Nose
- Pneumatic
- Electric
- Electric Conversion Kits
- Mains
- Rotating
- Pneumatic
- Electric
- Electric Conversion Kits
- OEM Retract Sets
- Electric
- Pneumatic
- 620 Series
- 20 - 55lbs
- 635 Series
- Mains
- Pneumatic
- Electric
- Electric Conversion Kits
- Nose
- Pneumatic
- Electric
- Electric Conversion Kits
- Mains
- Rotating
- Pneumatic
- Electric
- Electric Conversion Kits
- Non-Rotating
- Electric
- Electric Conversion Kits
- Pneumatic
- Nose Gears
- Electric
- Electric Conversion Kits
- Pneumatic
- OEM Retract Sets
- Pneumatic
- Electric
- Electric Conversion Kits
- 635 Series
- Tailwheels
- Fixed Tailwheels
- Retractable Tailwheels
- Mechanical
- Pneumatic
- Electric
- Electric Conversion Kits
- Less Than 2lbs
- Retract Spare Parts
- Wire Strut Kits
- Misc Adapters, Upgrades, ane Etc
- Electric Retract Accessories
- RoboStruts
- By Manufacturer
- By Diameter
- 3/8" Dia
- 7/16" Dia
- 1/2" Dia
- 5/8" Dia
- OEM Strut Sets
- Piper Cub Gear
- Fixed Tailwheels
- 3/8" Dia
- By Aircraft Weight
- 5 - 12 lbs
- 12 - 18 lbs
- 18 - 25
lbs
- 25 - 50 lbs
- 5 - 12 lbs
- Piper Cub Gear
- OEM Strut Sets
- Accessories
- Main Gear Struts
- Nose Gear Struts
- Fixed Tailwheels
- Multi-Rotor
- Piper Cub
- Piper Cub Gear
- Cub Wheels
- Cub Kits
- Strut Covers
- Control Hinges
- Control Horns
- Fuel Systems
- Wheels
- Scale Wheels 2" - 4"
- Aluminum Wheels 2" - 4"
- Aluminum Wheels 4" - 6"
- 4" - 4 1/2" Wheels
- 5" - 6" Wheels
- Replacement Hubs
- Replacement Tires
- 4" - 4 1/2" Wheels
- Slim AL Wheels
- J-3 Cub Wheels
- Dubro - Super Lite 1.75"-3.00"
- Dubro - Diamond Lite Wheels 2.50" -3.00"
- Dubro -Super Slim 2.75" - 3.00"
- Dubro - Small Scale Tailwheels
- Brakes
- Disc Brakes
- Compact Unibrake
- Brake Valves
- Accessories
- Hobby Tools
- Airplane Stands
- Meters/Indicators
- Paint Shakers
- Carbide Cutters
- Pumps
- Zap Adhesive
- Zap CA's
- Zap Glue Accelerators
- Zap Speciality Glues
- Zap Misc Products
- Zap Epoxy Resins
- Zap Thread Lockers
- Fly Fishing Adhesives
- ZAP Glue Kits - Save Big$
- Top RC ARF
- Liquid Sky Smoke Oil
- Gifts, Appearal, and More
- Gift Card
- Gift Box
- Misc Items
- Appareal
- Clearance
- Refurbished Items
- Actuators, Cylinders, Robotics
- Pneumatic Cylinders
- Electric Actuators
Đây là một mặt hàng quá khổ không đủ điều kiện để miễn phí vận chuyển
Topa0400 Top Flite P-51D Mustang Giant Kit 2.1-2.8,84,5 "
Lưu ý: Phiếu giảm giá của Graves RC không được áp dụng với sản phẩm này & nbsp; & nbsp;
"
"
- Sử dụng các kỹ thuật, công cụ và vật liệu của bộ dụng cụ gỗ quen thuộc.
- Các bộ phận đan xen chính xác được thiết kế thông qua AutoCAD và kỹ lưỡng
- Hướng dẫn sử dụng thủ công bằng hình ảnh hướng dẫn các nhà lập mô hình thông qua lắp ráp & nbsp; quy trình.
- Bộ bao gồm nhiều chi tiết tỷ lệ hình thành chính xác, chẳng hạn như bộ tản nhiệt & nbsp; muỗng, đáy cowl, cổng và ống xả
- Trong không khí, P-51D khổng lồ mang đến hiệu suất bay quy mô và & NBSP; kích thước lớn của nó giúp bạn dễ dàng nhìn và đánh giá cao.
- IMAA [Hiệp hội máy bay thu nhỏ quốc tế] pháp lý.
- Cánh hoàn toàn đối xứng
- Đài phát thanh 6 đến 7 kênh với 10 servo [xem yêu cầu]
Các bộ phận ABS [Cowl, Gun, Cổng xả, Scoop tản nhiệt], Clear Canopy, Pushrods, Kế hoạch kích thước đầy đủ, Hướng dẫn được minh họa bằng hình ảnh và Gỗ để hoàn thành bộ dụng cụ.
Pushrods, Full Size Plans, Photo-Illustrated Instructions and
All Wood to Complete the Kit.
Động cơ: & nbsp; 2.1-2.8 Cu in [35-45cc] [phát sáng] hoặc 2,5-4.2 Cu trong [41-70cc] [gas] & nbsp; 5 " Valve, bình nhiên liệu 16-20oz & nbsp; bánh răng chính*, rút lại bánh sau, bộ điều khiển không khí. & Nbsp; radio: & nbsp; 6 đến 7 kênh r ; Mô-men xoắn 1-Throttlehigh [hơn 45 oz-in]: & nbsp; 2-elevator, 1-Rudder, 2-aileronsy-harness: & nbsp; 4 [thang máy, vạt, ailerons, lái xe bánh lái/đuôi] mở rộng servo [24 "] : & nbsp; Pin 2Receiver: & nbsp; 6v 1200mahcovering: & nbsp; bốn đến năm cuộn 6 feet và phù hợp với paintmisc. Hai mươi sáu điểm bản lề hạng nặng, & nbsp; mười sáu vít kim loại tấm #6x1/2 " Tailwheel, bao gồm các công cụ, thiết bị xây dựng và thực địa. 2.1-2.8 cu in [35-45cc][Glow] or 2.5-4.2 cu in [41-70cc][Gas] 5"* Spinner, Propeller, Engine Mount, Fuel Tubing, Easy Filler Fuel Valve, 16-20oz Fuel Tank
Main Gear*, Tailwheel Retract, Air Control Kit.
Radio: 6 to 7
Channel
Servos: 10 [Standard: 2-Flaps, 1-Retracts, 1-Tailwheel Steering, 1-Throttle
High Torque [over 45 oz-in]: 2-Elevator, 1-Rudder, 2-Ailerons
Y-Harness: 4 [Elevator, Flaps, Ailerons, Rudder/Tail Steering]
Servo Extensions [24"]: 2
Receiver Battery: 6V 1200mAh
Covering: Four to Five 6-Foot Rolls and Matching Paint
Misc. Items: Two 5" Main Wheels, 1¾" Tailwheel, Wheel Collars, Five
Heavy-Duty Control Horns, Twenty Six Heavy-Duty Hinge Points, Sixteen #6x1/2" Sheet Metal Screws [for mounting the retracts] ½/2" Foam Rubber Padding, Switch and Charge Mounting Jack, Pull-Pull Cable System for Steerable Tailwheel, Covering Tools,
Building and Field Equipment. .
Sải cánh: & NBSP; Khoảng cách gắn kết: & nbsp; 8-1/8 "từ tường lửa [không phải 7-7/8" như thể hiện các kết quả]. 84.5" Wing Area: 1245 sq in
Fuselage Length: 73-1/2" Weight [w/radio]: 18 - 23 lbs
Wing Loading: 32-35oz/ft Airfoil: Fully-Symmetrical
Low-Wing
Engine mount spacing: 8-1/8" from firewall [not 7-7/8" as shown in
instructions].
Topa0700 Top Flite khổng lồ P-51D Mustang ARF 2.1-2.8,84,5 "
Lưu ý: Phiếu giảm giá của Graves RC không được áp dụng với sản phẩm này & nbsp; & nbsp;
MẶT HÀNG NÀY KHÔNG ĐỦ ĐIỀU KIỆN ĐỂ MIỄN PHÍ VẬN CHUYỂN
"
"
- Xây dựng: & nbsp; Balsa và ván ép đầy đủ Fully sheeted balsa and plywood with pre-painted fiberglass fillets
- Cánh: & nbsp; khung gỗ một mảnh, được xây dựng sau đó được dán bằng gỗ One-piece, built up wood frame which is then sheeted with wood
- Cover: & nbsp; nhà máy ứng dụng hàng đầu Flite monokote trong bảng màu đến & nbsp; tái tạo "con búp bê lớn" của WWII được bay bởi Col John D Landers Factory applied Top Flite MonoKote in color scheme to recreate WWII's "Big Beautiful Doll" flown by Col John D Landers
- Phòng radio: & nbsp; dễ dàng truy cập, cân bằng ván ép Easily accessible, plywood reinforced
- Cowling: & nbsp; sợi thủy tinh, sơn trước Fiberglass, Pre-Painted
- Tán cây: & nbsp; rõ ràng, độc thân Clear, single
- Thiết bị hạ cánh: & nbsp; cố định dây nhiệm vụ nặng [¼ "], nhưng cũng được thiết lập để sử dụng & nbsp; Robart rút lại tùy chọn với cửa thiết bị hạ cánh chức năng Fixed heavy duty wire [¼"], but is also set up to use optional Robart retracts with functional landing gear doors
- Servos cánh kép: & nbsp; hai servo mỗi cánh một nửa [1 vạt, 1 aileron] Two servos per wing half [1 Flap, 1 Aileron]
- Spinner: & nbsp; 5 "[127mm] nhôm 5" [127mm] Aluminum
- Bộ dụng cụ buồng lái: & NBSP; nhựa abs được sơn sẵn với đề can Pre-Painted ABS plastic with decals
- Thời gian xây dựng: & nbsp; Sẵn sàng bay chỉ trong 25-30 giờ. Ready to fly in only 25-30 hours.
Các cánh, thân máy bay và đuôi được xây dựng trước và có mái che, máy đẩy, & NBSP; Pre-Bent "[6 mm] Thiết bị hạ cánh chính đã cố định, 5" [127mm] Bánh xe chính & NBSP; 2 "[51mm] 32oz [960cc] nhiên liệu & nbsp; xe tăng có nút bấm phát sáng [để sử dụng gas & nbsp;, không bao gồm], & nbsp; 5 "[127mm] spinner, khay servo gỗ và người tham gia cánh Bộ đề can màu
Động cơ: & nbsp; 2.1 -2.8 Cu in [34,5 -46cc] 2 thì & nbsp; hoặc 2.5 -4.3 Cu trong [41-70 cc] Spark Ignition xăng Enginemuffler: & NBSP; -11 Tiêu chuẩn [2-Raileron, 2 elevator, 1-Throttle, 1-Rudder, & NBSP; 2-Flaps, 1 đuôi lái, van điều khiển 1 không khí] [một servo mô-men xoắn cao được đề xuất cho bánh lái, nhưng không bắt buộc] Phần mở rộng servo: & nbsp; [2] mở rộng 24 ", [1] mở rộng servo kép & nbsp; [4] 6" extensionsy-harness: & nbsp; [1] y-harness cho flapsmisc. Các mặt hàng: & nbsp; phích cắm phát sáng, đệm cao su xốp 1/4 ", ống nhiên liệu trung bình, & nbsp; bộ lọc nhiên liệu, cánh quạt, thiết bị xây dựng và thực địa. 2.1 -2.8 cu in [34.5 - 46cc] 2-stroke OR 2.5 -4.3 cu in [41-70 cc] spark ignition gasoline engine
Muffler: Pitts style
Radio: 5 - 7 channel
Servos: 10-11 Standard [2-Aileron,
2-Elevator, 1-Throttle, 1-Rudder, 2-Flaps, 1-Tail Steering, 1-Air Control Valve]
[a high torque servo is suggested for the rudder, but not required]
Servo Extensions: [2] 24" Extension, [1] Dual Servo Extension [4] 6" Extensions
Y-Harness: [1] Y-harness for flaps
Misc. Items: Glow plug, 1/4" foam rubber padding, medium fuel tubing, fuel filter, propeller, building and field equipment.
Sải cánh: & nbsp; 84,5 "[2146mm] diện tích cánh: & nbsp; 1245 sq in [80,3 sq dm] trọng lượng: & nbsp; -107 g/sq dm] Chiều dài: & nbsp; 73,5 "[1865mm] Airfoil: & nbsp; hoàn toàn, đối xứng, trung tâm của trọng lực thấp: & NBSP; 4-9/16" [116mm] ; Tỷ lệ thấp tỷ lệ thấp: & nbsp; tăng & giảm 9/16 "[14mm] 3/8" [10 mm] bánh lái: & nbsp; phải sang trái 1½ "[38mm] 1" [25 mm] Ailerons: & nbsp; ". 84.5"
[2146mm]
Wing Area: 1245 sq in [80.3 sq dm]
Weight: 19 - 24 lbs [8.61 - 10.88kg]
Wing Loading: 32 - 35 oz/sq ft [98 - 107 g/sq dm]
Length: 73.5" [1865mm]
Airfoil: Fully-symmetrical, low-wing
Center of Gravity: 4-9/16" [116mm] Back from the wing's leading edge
Control Throws: High Rate Low Rate
Elevator: Up & Down 9/16" [14mm] 3/8" [10mm]
Rudder: Right to Left
1½" [38mm] 1" [25mm]
Ailerons: Up & Down ¾" [19mm]up ½" [13mm]up 5/8" [16mm]down 3/8" [10mm]down
Flaps: 1-3/16" [30mm] 2-1/8" [55mm]