C drive full Windows 10 but no files

There's a desktop system here that shows the C drive is almost full. (500Gig) I open, dig in, thinking there must be some programs or movies, or other data eating up space. Nothing. No movies, music, pics. No large files, other than Windows 10, Office, etc.
I've opened Program Files, Temp (empty), Windows, downloads. Nothing appears large or out of place. When I check the properties on the folders, everything is in the low kb or MB range.
What am I missing?

While using the computer/laptop device, sometimes it happens that your D drive is full but no files windows 10. It sucks all the storage space on the drive but upon inspection, you cannot find a single functional file. This can be due to several reasons including virus and malware attacks or unintentionally you have saved large files/folders to C drive. Other reasons may also apply to this condition. This article explains everything in detail.

Hard disk full but no files windows 10? This must be due to the virus or malware playing tricks and generating files to occupy all the space on the drive and leaving behind no capacity for storing the files and folders. In case of no virus or malware attacks, this error of low disk space but nothing to delete can pop up due to saving large files or folders on drive C about which you are not aware. It will consume space and makes it impossible for further data to be saved on the drive. In other cases, it is because of Pages files, previous Windows installation, temporary files, and other system files that are causing hard disk full but no files windows 10 or if you are using windows 7 i.e. windows 7 hard drive full. This article will explain every reason in detail and propose efficient methods to resolve the problem. Here are some of the topics that would be discussed in detail. 

• Part 1: Overview of A Hard Drive Full for No Reason
• Part 2: Fixes for Hard Drive Full But No Files in Windows 10

Part 1: Overview of A Hard Drive Full for No Reason

When your system keeps showing a hard disk full but no files windows 10, I must be facing certain errors due to which the storage capacity of the device is less to store further data. As mentioned above, possible this could be due to a virus or malware attack that creeps on the storage and generates files and folders that occupy the d drive. This means when the drive is full, the device will show C drive as full. Here are some of the symptoms that your device show in case of a hard drive full.

1. The device will run slow. It may freeze while running various programs or tasks.
2. No further storage is possible for new data. C drive will show a full storage message again and again.
3. All the tasks like software update/upgrade, install programs will stop and you cannot perform any of them.

Video tutorial: How to Fix Hard Disk Full But No Files on Windows 10?

Part 2: Fixes for Hard Drive Full But No Files in Windows 10

You know your drive is showing a message i.e. hard disk full but no files windows 10 but you cannot find any file or folder that could be deleted to release some memory, in this regard, here are some of the quick fixes for a hard drive full but no files in windows 10.

Method 1. Verify the virus problem

When the issue is low disk space but nothing to delete, then the foremost step is to verify the particular reason causing the problem. Only an appropriate method to fix this issue could be applied. Here again, the first culprit is a virus or malware attack. You can get this virus from any downloaded data or from the site where you entered your mailing id for verification. If a virus or malware attack is the problem in your case, then run a strong anti-virus and go for a thorough disk scan to clear all the clutter it created. After scanning, clean all, and the disk space would be released.

Method 2. Check disk errors

In case of any technical or logical system errors, a CHKDSK utility is the best solution. These system errors may cause faulty functioning of the hard drive or else they will show wrong disk space. Here are the steps to follow:

Step 1: Simultaneously press Windows + R keys. The dialogue i.e. Run box will appear on the screen. Type cmd inbox and click Ok to continue.

Step 2: In the next windows command prompt, enter chkdsk [drive letter]: /f /r /x. Here F stands for the letter assigned to the partition that is to be repaired, chkdsk /f shows the process of scanning the drive, chkdsk /r finds the bad sectors and recover data and chkdsk /x is about force running the volume.

Method 3. Show hidden files & folders

Sometimes, the disk space is occupied with the hidden files and folders due to which you might confront hard disk full but no files windows 10. In this case, unhide the files and folders to verify the reason. Here are the steps:

Step 1: Launch the control panel and select the option of file explorer followed by the option of View.

Step 2: Now check the box i.e. show hidden files, folders, and drives.

Step 3: return to the drive under examination and check if space is freed or not. You can also delete unnecessary files.

Method 4. Delete System restore points and shrink the disk usage

In the case of frequent system restorations, you might have created a large number of backups. This has eaten up huge space on the hard drive. For resolving the issue, you need to make a minute change in the windows backup and restore program. You can also delete the unimportant backups created.

Step 1: Launch the Control panel and select the option of Settings.

Step 2: In the settings menu, select the option of System protection followed by selecting Configure.

Step 3: Let the option of Turn on system protection continue.

Step 4: In the Disk space usage section, you can adjust the disk space that can be used for saving the daily backups created. Drag to adjust. A recommended percentage is 3-6%.

Step 5: Now click the delete option for deleting the restore points for the drive. Click Ok to continue.

Method 5. Hide the recovery partition by removing its drive letter

To resolve the hard drive full issue, one of the reliable solutions is to hide the recovery partition by removing its drive letter. Follow the steps:

Step 1: Launch the command box by pressing Windows + R keys and type cmd. Click ok to continue.

Step 2: In the next command prompt, enter the command line and hit enter. Now replace the drive letter with a new one. Once done, close the command box.

Method 6. Safe cleanup of junk files and large files

If detected in the drive, the junk file should be cleaned to release the memory. For this either you can use a third-party solution or you can also use the in-build disk cleanup utility.

Step 1: In the windows main menu, select the option of Accessories and then system tools.

Step 2: In the system tools menu, select the option of disk cleanup utility.

Step 3: In the disk cleanup utility, select the files that are targeted to be deleted and click delete files to complete the action.

Method 7. Delete temporary files

Sometimes, for releasing the memory, it is necessary to delete the temporary files. Files like leftover files, such as Windows installation files, upgrade logs, browse caches, etc. occupies large space on the drive. Deleting these files releases memory. Here is how you can do it.

Step 1: Launch the command prompt by pressing Windows + R keys. In the box, type prefetch and click ok to continue.

Step 2: In the next window command prompt, select all the temporary files for deletion. Press Ctrl + A to select all.

Step 3: Once selected, in the next run box, type %temp% and press enter to continue.

Step 4: Repeat the process as mentioned in step 2.

Step 5: Now type recently in the run box and click ok to continue.

Step 6: Again follow the lead as per done in step 2 and press delete to complete the action.

Method 8. Delete unwanted Windows Update

Window updates occupy huge memory on the drive. So it is apt to delete the unwanted window update to resolve the issue of hard disk full but no files windows 10. Here are the steps to follow:

Step 1: Click on c-drive and in the menu, select the option of software distribution followed by selecting the option download.

Step 2: Select all the files and delete them.

Method 9. Empty Windows recycle bin

Deleting files and folders from the drive is not enough, rather it creates an extra load on the recycle bin. This also takes a lot of space on the device. Empty the recycle bin and release the memory.

Step 1: Launch recycle bin from the main menu.

Step 2: Now choose the option of Empty Recycle Bin.

Step 3: The process of deletion will start and you can see the progress. Once completed, you will release the space occupied.

Method 10. Replace a drive

If none of the above solutions work for releasing the memory to resolve the issue of the d drive is full but no files windows 10, ultimately you have to replace your hard drive. It can be the only solution appropriate to tackle the space issue.

Hence, the d drive is full but no files windows 10 is sometimes a common issue for several reasons. As mentioned above, it could be the virus or malware, a bad sector, any technical fault of the drive that is showing the wrong space. This for sure is going to make your device slow, you cannot save any new data on the device or cannot approach the latest updates for your device. This article proposes various solutions that would work to release memory. All you have to do is to verify the actual cause of the problem and then you can select any of the suitable methods mentioned above to resolve the issue.